Hoyer P.R.O. Matt Plus Mattress System Hoyer P.R.O. Matt Plus Mattress System

Model Number : PMP
$2,459.00

Many in stock

Furniture Furniture

Joerns Healthcare Joerns Healthcare

DESCRIPTION

Convertible Air Foam Mattress designed for pressure ulcer prevention and treatment

The P.R.O. Matt® Plus is a non-powered mattress replacement system featuring our Pressure Redistribution Optimization (P.R.O.) Technology. With the addition of an optional control unit, the mattress provides powered immersion or alternating pressure therapy, allowing facilities to use one mattress for both pressure ulcer prevention and treatment. 

The unique P.R.O. Technology design requires no adjustments or manual inflation. The mattress features a sophisticated internal hosing and valve system that is invisible to the caregiver and patient, but enables the surface to automatically adjust to each patient’s weight and body profile.

  • Four-zone system: head, shoulder, torso, foot
  • Width: 36" or 42"
  • Length: 80" or 84"
  • Height: 7"
  • Maximum weight capacity: 500 lbs.
  • Flammability Standards: meets fire codes CA 117, CA 129, 16 CFR 1633 and BFD IX-11

ES2 CONTROL UNIT SPECIFICATIONS:

  • Width: 7.5"
  • Height: 12.25"
  • Depth: 5.5"
  • Weight: 7 lbs.
  • 120V AC, 60 Hz

CLINICAL INDICATIONS:

  • P.R.O. Matt Plus is a reactive surface that allows the provision of optimal interface pressures through controlled air cell inflation for at-risk patients in the prevention and treatment of Stage I and II pressure ulcers, and treatment of uncomplicated Stage III and IV ulcers in patients with multiple turning surfaces. For Stage III and/or Stage IV treatment, care staff should be able to position the patient off of the pressure wound in at least 2 positions.
  • Through the addition of the optional pump, the P.R.O. Matt Plus becomes an active surface with alternating pressure that adds the benefit of cyclic offloading for advanced treatment of uncomplicated Stage III or IV pressure ulcers for patients where such therapy may improve pressure redistribution and circulation. In all cases, Joerns clinical indications are guidelines and should be taken only as recommendations for consideration during individual patient assessment by the clinician.

FEATURES:

  • Four-zoned system (head, shoulder, torso and foot) inner air core automatically adjusts to each patient's body profile and weight
  • P.R.O. Technology valve maintains optimal air pressures in each therapy zone for superior pressure redistribution regardless of patient weight and profile
  • One-inch viscoelastic topper enhances pressure redistribution and patient comfort
  • Optional raised perimeter available
  • Surrounding firm perimeter provides stability during patient care and contributes to patient safety by eliminating gaps between frames and siderails
  • Therapy pad with these unique qualities:
    • Fluid proof and stain resistant
    • Low friction and low shear surface
    • Zippered construction

ptional ES2 Control Unit:

  • Convert your P.R.O. Matt Plus to alternating pressure therapy to enhance patient comfort and wound healing
  • Three alternating pressure zones, including the delicate heel section for optimal pressure redistribution
  • Three modes of operation: Autofirm, Powered (static) and Alternating
  • Autofirm assists patients and caregivers during patient transfer and treatment
  • Powered control settings for eight levels to maximize patient compliance and promote healing
  • Alternating cycle times options of 5, 10 and 15 minutes
  • Closed loop control system eliminates concerns of changes in mattress interface...

DESCRIPTION

Convertible Air Foam Mattress designed for pressure ulcer prevention and treatment

The P.R.O. Matt® Plus is a non-powered mattress replacement system featuring our Pressure Redistribution Optimization (P.R.O.) Technology. With the addition of an optional control unit, the mattress provides powered immersion or alternating pressure therapy, allowing facilities to use one mattress for both pressure ulcer prevention and treatment. 

The unique P.R.O. Technology design requires no adjustments or manual inflation. The mattress features a sophisticated internal hosing and valve system that is invisible to the caregiver and patient, but enables the surface to automatically adjust to each patient’s weight and body profile.

  • Four-zone system: head, shoulder, torso, foot
  • Width: 36" or 42"
  • Length: 80" or 84"
  • Height: 7"
  • Maximum weight capacity: 500 lbs.
  • Flammability Standards: meets fire codes CA 117, CA 129, 16 CFR 1633 and BFD IX-11

ES2 CONTROL UNIT SPECIFICATIONS:

  • Width: 7.5"
  • Height: 12.25"
  • Depth: 5.5"
  • Weight: 7 lbs.
  • 120V AC, 60 Hz

CLINICAL INDICATIONS:

  • P.R.O. Matt Plus is a reactive surface that allows the provision of optimal interface pressures through controlled air cell inflation for at-risk patients in the prevention and treatment of Stage I and II pressure ulcers, and treatment of uncomplicated Stage III and IV ulcers in patients with multiple turning surfaces. For Stage III and/or Stage IV treatment, care staff should be able to position the patient off of the pressure wound in at least 2 positions.
  • Through the addition of the optional pump, the P.R.O. Matt Plus becomes an active surface with alternating pressure that adds the benefit of cyclic offloading for advanced treatment of uncomplicated Stage III or IV pressure ulcers for patients where such therapy may improve pressure redistribution and circulation. In all cases, Joerns clinical indications are guidelines and should be taken only as recommendations for consideration during individual patient assessment by the clinician.

FEATURES:

  • Four-zoned system (head, shoulder, torso and foot) inner air core automatically adjusts to each patient's body profile and weight
  • P.R.O. Technology valve maintains optimal air pressures in each therapy zone for superior pressure redistribution regardless of patient weight and profile
  • One-inch viscoelastic topper enhances pressure redistribution and patient comfort
  • Optional raised perimeter available
  • Surrounding firm perimeter provides stability during patient care and contributes to patient safety by eliminating gaps between frames and siderails
  • Therapy pad with these unique qualities:
    • Fluid proof and stain resistant
    • Low friction and low shear surface
    • Zippered construction

ptional ES2 Control Unit:

  • Convert your P.R.O. Matt Plus to alternating pressure therapy to enhance patient comfort and wound healing
  • Three alternating pressure zones, including the delicate heel section for optimal pressure redistribution
  • Three modes of operation: Autofirm, Powered (static) and Alternating
  • Autofirm assists patients and caregivers during patient transfer and treatment
  • Powered control settings for eight levels to maximize patient compliance and promote healing
  • Alternating cycle times options of 5, 10 and 15 minutes
  • Closed loop control system eliminates concerns of changes in mattress interface...
Size
Control Unit
-
+
$2,459.00

DESCRIPTION

Convertible Air Foam Mattress designed for pressure ulcer prevention and treatment

The P.R.O. Matt® Plus is a non-powered mattress replacement system featuring our Pressure Redistribution Optimization (P.R.O.) Technology. With the addition of an optional control unit, the mattress provides powered immersion or alternating pressure therapy, allowing facilities to use one mattress for both pressure ulcer prevention and treatment. 

The unique P.R.O. Technology design requires no adjustments or manual inflation. The mattress features a sophisticated internal hosing and valve system that is invisible to the caregiver and patient, but enables the surface to automatically adjust to each patient’s weight and body profile.

  • Four-zone system: head, shoulder, torso, foot
  • Width: 36" or 42"
  • Length: 80" or 84"
  • Height: 7"
  • Maximum weight capacity: 500 lbs.
  • Flammability Standards: meets fire codes CA 117, CA 129, 16 CFR 1633 and BFD IX-11

ES2 CONTROL UNIT SPECIFICATIONS:

  • Width: 7.5"
  • Height: 12.25"
  • Depth: 5.5"
  • Weight: 7 lbs.
  • 120V AC, 60 Hz

CLINICAL INDICATIONS:

  • P.R.O. Matt Plus is a reactive surface that allows the provision of optimal interface pressures through controlled air cell inflation for at-risk patients in the prevention and treatment of Stage I and II pressure ulcers, and treatment of uncomplicated Stage III and IV ulcers in patients with multiple turning surfaces. For Stage III and/or Stage IV treatment, care staff should be able to position the patient off of the pressure wound in at least 2 positions.
  • Through the addition of the optional pump, the P.R.O. Matt Plus becomes an active surface with alternating pressure that adds the benefit of cyclic offloading for advanced treatment of uncomplicated Stage III or IV pressure ulcers for patients where such therapy may improve pressure redistribution and circulation. In all cases, Joerns clinical indications are guidelines and should be taken only as recommendations for consideration during individual patient assessment by the clinician.

FEATURES:

  • Four-zoned system (head, shoulder, torso and foot) inner air core automatically adjusts to each patient's body profile and weight
  • P.R.O. Technology valve maintains optimal air pressures in each therapy zone for superior pressure redistribution regardless of patient weight and profile
  • One-inch viscoelastic topper enhances pressure redistribution and patient comfort
  • Optional raised perimeter available
  • Surrounding firm perimeter provides stability during patient care and contributes to patient safety by eliminating gaps between frames and siderails
  • Therapy pad with these unique qualities:
    • Fluid proof and stain resistant
    • Low friction and low shear surface
    • Zippered construction

ptional ES2 Control Unit:

  • Convert your P.R.O. Matt Plus to alternating pressure therapy to enhance patient comfort and wound healing
  • Three alternating pressure zones, including the delicate heel section for optimal pressure redistribution
  • Three modes of operation: Autofirm, Powered (static) and Alternating
  • Autofirm assists patients and caregivers during patient transfer and treatment
  • Powered control settings for eight levels to maximize patient compliance and promote healing
  • Alternating cycle times options of 5, 10 and 15 minutes
  • Closed loop control system eliminates concerns of changes in mattress interface pressure due to patient repositioning and ambient temperature changes

DESCRIPTION

Convertible Air Foam Mattress designed for pressure ulcer prevention and treatment

The P.R.O. Matt® Plus is a non-powered mattress replacement system featuring our Pressure Redistribution Optimization (P.R.O.) Technology. With the addition of an optional control unit, the mattress provides powered immersion or alternating pressure therapy, allowing facilities to use one mattress for both pressure ulcer prevention and treatment. 

The unique P.R.O. Technology design requires no adjustments or manual inflation. The mattress features a sophisticated internal hosing and valve system that is invisible to the caregiver and patient, but enables the surface to automatically adjust to each patient’s weight and body profile.

  • Four-zone system: head, shoulder, torso, foot
  • Width: 36" or 42"
  • Length: 80" or 84"
  • Height: 7"
  • Maximum weight capacity: 500 lbs.
  • Flammability Standards: meets fire codes CA 117, CA 129, 16 CFR 1633 and BFD IX-11

ES2 CONTROL UNIT SPECIFICATIONS:

  • Width: 7.5"
  • Height: 12.25"
  • Depth: 5.5"
  • Weight: 7 lbs.
  • 120V AC, 60 Hz

CLINICAL INDICATIONS:

  • P.R.O. Matt Plus is a reactive surface that allows the provision of optimal interface pressures through controlled air cell inflation for at-risk patients in the prevention and treatment of Stage I and II pressure ulcers, and treatment of uncomplicated Stage III and IV ulcers in patients with multiple turning surfaces. For Stage III and/or Stage IV treatment, care staff should be able to position the patient off of the pressure wound in at least 2 positions.
  • Through the addition of the optional pump, the P.R.O. Matt Plus becomes an active surface with alternating pressure that adds the benefit of cyclic offloading for advanced treatment of uncomplicated Stage III or IV pressure ulcers for patients where such therapy may improve pressure redistribution and circulation. In all cases, Joerns clinical indications are guidelines and should be taken only as recommendations for consideration during individual patient assessment by the clinician.

FEATURES:

  • Four-zoned system (head, shoulder, torso and foot) inner air core automatically adjusts to each patient's body profile and weight
  • P.R.O. Technology valve maintains optimal air pressures in each therapy zone for superior pressure redistribution regardless of patient weight and profile
  • One-inch viscoelastic topper enhances pressure redistribution and patient comfort
  • Optional raised perimeter available
  • Surrounding firm perimeter provides stability during patient care and contributes to patient safety by eliminating gaps between frames and siderails
  • Therapy pad with these unique qualities:
    • Fluid proof and stain resistant
    • Low friction and low shear surface
    • Zippered construction

ptional ES2 Control Unit:

  • Convert your P.R.O. Matt Plus to alternating pressure therapy to enhance patient comfort and wound healing
  • Three alternating pressure zones, including the delicate heel section for optimal pressure redistribution
  • Three modes of operation: Autofirm, Powered (static) and Alternating
  • Autofirm assists patients and caregivers during patient transfer and treatment
  • Powered control settings for eight levels to maximize patient compliance and promote healing
  • Alternating cycle times options of 5, 10 and 15 minutes
  • Closed loop control system eliminates concerns of changes in mattress interface pressure due to patient repositioning and ambient temperature changes
Product Weight: 20 lbs.
Product Weight: 20 lbs.

SHIPPING

Our goal is to offer you the best shipping options, no matter where you live. Every day, we deliver to hundreds of customers across the world, ensuring that we provide the very highest levels of responsiveness to you at all times. (Please note that shipping to Hawaii and Alaska may be more expensive. if there is any changes in shipping rates for these two locations upon processing your order, we will contact you to further advise of your options.)

The time frame for order delivery is divided into two parts:
1: Processing time.

Order verification, quality check, and packaging.

Processing time usually takes 24-48 hours.

2: Shipping time.

Once order has shipped (24 to 72 hours)

You will receive a email with the tracking number and package should deliver to you within 5 business days.

For whichever reason you did not receive a tracking number within 72 hours, feel free to contact us at: info@ezmedbuy.com

RETURNS

We offer a 30 day return policy if you are not 100% satisfied with your product.

These are the products included in 30 day return policy:

Electric wheelchairs.

Manual wheelchairs.

Lightweight wheelchairs.

Electric scooters.

Power lifts.

Walkers.

Rollators.

To qualify for a return you will need to contact us first and obtain a RA# and return address.

All items must come back in its original packaging and in good/unused condition and must be received back in our warehouse within the 30 days.

There is a 15% restocking fee plus the original shipping fee for all returns and the customer is responsible for return shipping.

We do not currently offer returns for:

Wheelchair cushions.

Ultra lightweight chairs.

Custom orders.

Parts.

Accessories.

in case if you receive your Item damaged, we require that you get in touch with us within 72 hours of delivery to report the damages in order to consider it damage upon delivery.

If a customer refuses the package at the time of delivery, then the customer will be responsible for all shipping fees.

SHIPPING

Our goal is to offer you the best shipping options, no matter where you live. Every day, we deliver to hundreds of customers across the world, ensuring that we provide the very highest levels of responsiveness to you at all times. (Please note that shipping to Hawaii and Alaska may be more expensive. if there is any changes in shipping rates for these two locations upon processing your order, we will contact you to further advise of your options.)

The time frame for order delivery is divided into two parts:
1: Processing time.

Order verification, quality check, and packaging.

Processing time usually takes 24-48 hours.

2: Shipping time.

Once order has shipped (24 to 72 hours)

You will receive a email with the tracking number and package should deliver to you within 5 business days.

For whichever reason you did not receive a tracking number within 72 hours, feel free to contact us at: info@ezmedbuy.com

RETURNS

We offer a 30 day return policy if you are not 100% satisfied with your product.

These are the products included in 30 day return policy:

Electric wheelchairs.

Manual wheelchairs.

Lightweight wheelchairs.

Electric scooters.

Power lifts.

Walkers.

Rollators.

To qualify for a return you will need to contact us first and obtain a RA# and return address.

All items must come back in its original packaging and in good/unused condition and must be received back in our warehouse within the 30 days.

There is a 15% restocking fee plus the original shipping fee for all returns and the customer is responsible for return shipping.

We do not currently offer returns for:

Wheelchair cushions.

Ultra lightweight chairs.

Custom orders.

Parts.

Accessories.

in case if you receive your Item damaged, we require that you get in touch with us within 72 hours of delivery to report the damages in order to consider it damage upon delivery.

If a customer refuses the package at the time of delivery, then the customer will be responsible for all shipping fees.

Recently Viewed Products