Hoyer Arise 1000 EX Bariatric Low Air Loss LAL Pressure Relief Surface Hoyer Arise 1000 EX Bariatric Low Air Loss LAL Pressure Relief Surface

Model Number : AREXLAL-4888NZ
$13,375.00

Many in stock

Furniture Furniture

Joerns Healthcare Joerns Healthcare

DESCRIPTION

Bariatric Solutions for the Patient and the Caregiver

The Arise 1000 EX is an expandable therapy system that provides pressure redistribution by combining low air loss with pulsation for patients weighing up to 1000 pounds. This product has been specifically designed for the unique features of the Joerns Bari10A bed frame and its capability to extend and contract in width and length.  

With special features such as a power interruption alarm, a patient position sensor which optimizes support for seated patients (Fowler Boost) and a low friction and low shear cover, the Arise 1000 EX can provide increased caregiver peace of mind and patient comfort for your bariatric patients.

  • Mattress Width: 36" (91cm), 42" (107cm), 48" (122cm)
  • Mattress Length: 80" (203cm), 88" (224cm)
  • Mattress Depth: 8.5" (22cm)
  • Mattress weight: 28 lbs. (13 Kg)
  • Maximum weight capacity: 1000 lbs. (455 Kg)
  • Control Unit Dimensions: 13.5" (34 cm)W x 11" (28 cm)H x 7.5" (19 cm)D
  • Control unit weight: 10 lbs. (4.5 Kg)

CLINICAL INDICATIONS

  • Pressure redistribution: Stage I - IV Pressure Ulcers, Moisture Management Required, Rehabilitation, Burns, Neurology, Dermatology, Amputations
  • Pain Management: AIDS, Arthritis, Oncology

FEATURES

  • Sixteen (eight paired) therapy cells help to evenly distribute the patient’s weight and maximize pressure relief
  • Five-inch deep therapy cells provide support and prevent bottoming out for patients within weight limit
  • Mattress control panel provides: independent inflation and deflation of six-inch wide side bolsters when used in combination with the Joerns Bari10A bed frame (allows for mattress widths of 36", 42" or 48")
  • Length inflation and deflation from 80" to 88"
  • Inflation and deflation of integrated CairRails risk management side air bolsters
  • Lower three-inch therapy cell provides support in the event of a power failure
  • Three zone system: head, seat and foot
  • Low shear and low friction nylon therapy pad is treated with an antimicrobial agent
  • Anti-kink, easy clean air supply hose set Maximum weight capacity of 1000 lbs.
  • Control unit features true low air loss
  • Three modes of operation – Autofirm, Pulsate and Therapy
  • Autofirm mode provides maximum air inflation to assist both patient and caregiver during patient transfer and treatment
  • Pulsate mode oscillates air throughout the mattress every 30 seconds providing increased patient comfort
  • Therapy control settings with eight levels to maximize patient comfort, compliance and to promote healing
  • Patient position sensor optimizes support for seated occupants (Fowler Boost)
  • Quick disconnect hose feature allows for rapid attach and CPR deflate at the control unit
  • Automatic panel lock out to avoid unwanted or accidental adjustments
  • Specially designed enclosure for low noise and durability

DESCRIPTION

Bariatric Solutions for the Patient and the Caregiver

The Arise 1000 EX is an expandable therapy system that provides pressure redistribution by combining low air loss with pulsation for patients weighing up to 1000 pounds. This product has been specifically designed for the unique features of the Joerns Bari10A bed frame and its capability to extend and contract in width and length.  

With special features such as a power interruption alarm, a patient position sensor which optimizes support for seated patients (Fowler Boost) and a low friction and low shear cover, the Arise 1000 EX can provide increased caregiver peace of mind and patient comfort for your bariatric patients.

  • Mattress Width: 36" (91cm), 42" (107cm), 48" (122cm)
  • Mattress Length: 80" (203cm), 88" (224cm)
  • Mattress Depth: 8.5" (22cm)
  • Mattress weight: 28 lbs. (13 Kg)
  • Maximum weight capacity: 1000 lbs. (455 Kg)
  • Control Unit Dimensions: 13.5" (34 cm)W x 11" (28 cm)H x 7.5" (19 cm)D
  • Control unit weight: 10 lbs. (4.5 Kg)

CLINICAL INDICATIONS

  • Pressure redistribution: Stage I - IV Pressure Ulcers, Moisture Management Required, Rehabilitation, Burns, Neurology, Dermatology, Amputations
  • Pain Management: AIDS, Arthritis, Oncology

FEATURES

  • Sixteen (eight paired) therapy cells help to evenly distribute the patient’s weight and maximize pressure relief
  • Five-inch deep therapy cells provide support and prevent bottoming out for patients within weight limit
  • Mattress control panel provides: independent inflation and deflation of six-inch wide side bolsters when used in combination with the Joerns Bari10A bed frame (allows for mattress widths of 36", 42" or 48")
  • Length inflation and deflation from 80" to 88"
  • Inflation and deflation of integrated CairRails risk management side air bolsters
  • Lower three-inch therapy cell provides support in the event of a power failure
  • Three zone system: head, seat and foot
  • Low shear and low friction nylon therapy pad is treated with an antimicrobial agent
  • Anti-kink, easy clean air supply hose set Maximum weight capacity of 1000 lbs.
  • Control unit features true low air loss
  • Three modes of operation – Autofirm, Pulsate and Therapy
  • Autofirm mode provides maximum air inflation to assist both patient and caregiver during patient transfer and treatment
  • Pulsate mode oscillates air throughout the mattress every 30 seconds providing increased patient comfort
  • Therapy control settings with eight levels to maximize patient comfort, compliance and to promote healing
  • Patient position sensor optimizes support for seated occupants (Fowler Boost)
  • Quick disconnect hose feature allows for rapid attach and CPR deflate at the control unit
  • Automatic panel lock out to avoid unwanted or accidental adjustments
  • Specially designed enclosure for low noise and durability
-
+
$13,375.00

DESCRIPTION

Bariatric Solutions for the Patient and the Caregiver

The Arise 1000 EX is an expandable therapy system that provides pressure redistribution by combining low air loss with pulsation for patients weighing up to 1000 pounds. This product has been specifically designed for the unique features of the Joerns Bari10A bed frame and its capability to extend and contract in width and length.  

With special features such as a power interruption alarm, a patient position sensor which optimizes support for seated patients (Fowler Boost) and a low friction and low shear cover, the Arise 1000 EX can provide increased caregiver peace of mind and patient comfort for your bariatric patients.

  • Mattress Width: 36" (91cm), 42" (107cm), 48" (122cm)
  • Mattress Length: 80" (203cm), 88" (224cm)
  • Mattress Depth: 8.5" (22cm)
  • Mattress weight: 28 lbs. (13 Kg)
  • Maximum weight capacity: 1000 lbs. (455 Kg)
  • Control Unit Dimensions: 13.5" (34 cm)W x 11" (28 cm)H x 7.5" (19 cm)D
  • Control unit weight: 10 lbs. (4.5 Kg)

CLINICAL INDICATIONS

  • Pressure redistribution: Stage I - IV Pressure Ulcers, Moisture Management Required, Rehabilitation, Burns, Neurology, Dermatology, Amputations
  • Pain Management: AIDS, Arthritis, Oncology

FEATURES

  • Sixteen (eight paired) therapy cells help to evenly distribute the patient’s weight and maximize pressure relief
  • Five-inch deep therapy cells provide support and prevent bottoming out for patients within weight limit
  • Mattress control panel provides: independent inflation and deflation of six-inch wide side bolsters when used in combination with the Joerns Bari10A bed frame (allows for mattress widths of 36", 42" or 48")
  • Length inflation and deflation from 80" to 88"
  • Inflation and deflation of integrated CairRails risk management side air bolsters
  • Lower three-inch therapy cell provides support in the event of a power failure
  • Three zone system: head, seat and foot
  • Low shear and low friction nylon therapy pad is treated with an antimicrobial agent
  • Anti-kink, easy clean air supply hose set Maximum weight capacity of 1000 lbs.
  • Control unit features true low air loss
  • Three modes of operation – Autofirm, Pulsate and Therapy
  • Autofirm mode provides maximum air inflation to assist both patient and caregiver during patient transfer and treatment
  • Pulsate mode oscillates air throughout the mattress every 30 seconds providing increased patient comfort
  • Therapy control settings with eight levels to maximize patient comfort, compliance and to promote healing
  • Patient position sensor optimizes support for seated occupants (Fowler Boost)
  • Quick disconnect hose feature allows for rapid attach and CPR deflate at the control unit
  • Automatic panel lock out to avoid unwanted or accidental adjustments
  • Specially designed enclosure for low noise and durability

DESCRIPTION

Bariatric Solutions for the Patient and the Caregiver

The Arise 1000 EX is an expandable therapy system that provides pressure redistribution by combining low air loss with pulsation for patients weighing up to 1000 pounds. This product has been specifically designed for the unique features of the Joerns Bari10A bed frame and its capability to extend and contract in width and length.  

With special features such as a power interruption alarm, a patient position sensor which optimizes support for seated patients (Fowler Boost) and a low friction and low shear cover, the Arise 1000 EX can provide increased caregiver peace of mind and patient comfort for your bariatric patients.

  • Mattress Width: 36" (91cm), 42" (107cm), 48" (122cm)
  • Mattress Length: 80" (203cm), 88" (224cm)
  • Mattress Depth: 8.5" (22cm)
  • Mattress weight: 28 lbs. (13 Kg)
  • Maximum weight capacity: 1000 lbs. (455 Kg)
  • Control Unit Dimensions: 13.5" (34 cm)W x 11" (28 cm)H x 7.5" (19 cm)D
  • Control unit weight: 10 lbs. (4.5 Kg)

CLINICAL INDICATIONS

  • Pressure redistribution: Stage I - IV Pressure Ulcers, Moisture Management Required, Rehabilitation, Burns, Neurology, Dermatology, Amputations
  • Pain Management: AIDS, Arthritis, Oncology

FEATURES

  • Sixteen (eight paired) therapy cells help to evenly distribute the patient’s weight and maximize pressure relief
  • Five-inch deep therapy cells provide support and prevent bottoming out for patients within weight limit
  • Mattress control panel provides: independent inflation and deflation of six-inch wide side bolsters when used in combination with the Joerns Bari10A bed frame (allows for mattress widths of 36", 42" or 48")
  • Length inflation and deflation from 80" to 88"
  • Inflation and deflation of integrated CairRails risk management side air bolsters
  • Lower three-inch therapy cell provides support in the event of a power failure
  • Three zone system: head, seat and foot
  • Low shear and low friction nylon therapy pad is treated with an antimicrobial agent
  • Anti-kink, easy clean air supply hose set Maximum weight capacity of 1000 lbs.
  • Control unit features true low air loss
  • Three modes of operation – Autofirm, Pulsate and Therapy
  • Autofirm mode provides maximum air inflation to assist both patient and caregiver during patient transfer and treatment
  • Pulsate mode oscillates air throughout the mattress every 30 seconds providing increased patient comfort
  • Therapy control settings with eight levels to maximize patient comfort, compliance and to promote healing
  • Patient position sensor optimizes support for seated occupants (Fowler Boost)
  • Quick disconnect hose feature allows for rapid attach and CPR deflate at the control unit
  • Automatic panel lock out to avoid unwanted or accidental adjustments
  • Specially designed enclosure for low noise and durability

SHIPPING

Our goal is to offer you the best shipping options, no matter where you live. Every day, we deliver to hundreds of customers across the world, ensuring that we provide the very highest levels of responsiveness to you at all times. (Please note that shipping to Hawaii and Alaska may be more expensive. if there is any changes in shipping rates for these two locations upon processing your order, we will contact you to further advise of your options.)

The time frame for order delivery is divided into two parts:
1: Processing time.

Order verification, quality check, and packaging.

Processing time usually takes 24-48 hours.

2: Shipping time.

Once order has shipped (24 to 72 hours)

You will receive a email with the tracking number and package should deliver to you within 5 business days.

For whichever reason you did not receive a tracking number within 72 hours, feel free to contact us at: info@ezmedbuy.com

RETURNS

We offer a 30 day return policy if you are not 100% satisfied with your product.

These are the products included in 30 day return policy:

Electric wheelchairs.

Manual wheelchairs.

Lightweight wheelchairs.

Electric scooters.

Power lifts.

Walkers.

Rollators.

To qualify for a return you will need to contact us first and obtain a RA# and return address.

All items must come back in its original packaging and in good/unused condition and must be received back in our warehouse within the 30 days.

There is a 15% restocking fee plus the original shipping fee for all returns and the customer is responsible for return shipping.

We do not currently offer returns for:

Wheelchair cushions.

Ultra lightweight chairs.

Custom orders.

Parts.

Accessories.

in case if you receive your Item damaged, we require that you get in touch with us within 72 hours of delivery to report the damages in order to consider it damage upon delivery.

If a customer refuses the package at the time of delivery, then the customer will be responsible for all shipping fees.

SHIPPING

Our goal is to offer you the best shipping options, no matter where you live. Every day, we deliver to hundreds of customers across the world, ensuring that we provide the very highest levels of responsiveness to you at all times. (Please note that shipping to Hawaii and Alaska may be more expensive. if there is any changes in shipping rates for these two locations upon processing your order, we will contact you to further advise of your options.)

The time frame for order delivery is divided into two parts:
1: Processing time.

Order verification, quality check, and packaging.

Processing time usually takes 24-48 hours.

2: Shipping time.

Once order has shipped (24 to 72 hours)

You will receive a email with the tracking number and package should deliver to you within 5 business days.

For whichever reason you did not receive a tracking number within 72 hours, feel free to contact us at: info@ezmedbuy.com

RETURNS

We offer a 30 day return policy if you are not 100% satisfied with your product.

These are the products included in 30 day return policy:

Electric wheelchairs.

Manual wheelchairs.

Lightweight wheelchairs.

Electric scooters.

Power lifts.

Walkers.

Rollators.

To qualify for a return you will need to contact us first and obtain a RA# and return address.

All items must come back in its original packaging and in good/unused condition and must be received back in our warehouse within the 30 days.

There is a 15% restocking fee plus the original shipping fee for all returns and the customer is responsible for return shipping.

We do not currently offer returns for:

Wheelchair cushions.

Ultra lightweight chairs.

Custom orders.

Parts.

Accessories.

in case if you receive your Item damaged, we require that you get in touch with us within 72 hours of delivery to report the damages in order to consider it damage upon delivery.

If a customer refuses the package at the time of delivery, then the customer will be responsible for all shipping fees.

Recently Viewed Products